Ncs Expert Windows 7 Download

Posted on by admin
Ncs Expert Windows 7 Download 9,5/10 9612 votes
BMW INPA, NCS Expert, WinKFP and more Virtualbox Image
NO OS INSTALL; NO INPA INSTALL; ALL IN ONE ONECLICK INSTALL:
Just set the proper COM port in the 'obd.ini' file located in; C:EDIABASbin to matche you settings from your Operating System.
For windows, below.
To load the VortualBox image, you need to download the Oracle VirtualBox and the VM VirtualBox Extension Pack
Download VirtualBox
Oracle VM VirtualBox Extension Pack
or visit their website on:
https://www.virtualbox.org/wiki/Downloads
Description
Inpa software collection does conflict with some other diagnostic software like Vida Dice (Volvo) etc.
So to avoid software miss-function, working Virtualbox image was created.
All the software and tools you might need for coding and flashing a BMW, are pre installed and configured in a Virtualbox image. Works with a K+Dcan cable – INPA, NCS Expert + NCS Dummy, WinKFP, EDIABAS, ToolSet 32, BMW Coding tool, NavCoder, BMW PassThru Tool + iToolRadar + EasyConnect for connecting with other cables (ICOM, Ethernet, etc.)
Versions:
Inpa 5.0.6 EDIABAS 7.3.0 NCS Expert 4.0.1 (pass: repxet) NCS Dummy 0.6.0.7 Tool32 4.0.3 WinKFP 5.3.1 SP-DATEN 53.3 BMW Coding Tool 2.5.0 Dr.Gini – 2014 NavCoder 2.9.18­3 BMW PassThru Tool All the posible K+Dcan USB drivers are available through the shortcut on the Desktop (USB Drivers) – for maximum compatibility with chineese noname ones try the OriginalCable subdirectory or FakeCable
All the software comes with english interface and pre configured USB K+Dcan cable.
For coding – use the included BMW Coding tool and get SPDATEN from the internet. To share a folder from your host machine (eg. your Downloads folder where the SPDATEN probably will end up) – Machine > Settings option in a virtual machine’s window and select Shared Folders. There are two types of shared folders — Machine Folders are permanent folders that will be shared until you remove them, while Transient Folders are temporary and will be removed when the virtual machine restarts or shuts down. Click the Add button or right-click in the list and select Add Shared Folder to add a new shared folder. The folder path is the location of the shared folder on your host operating system, while the name is how it will appear inside the guest operating system. Because this is Windows XP – to access the shared folder – right click on My Computer > Explore, from there click on the expand icon (+) right next to My Network Places and you should be able to see VirtualBox Shared Folders.
To use with ICOM – change the Network adapter from NAT to Bridged with your LAN card.
Settings > Network > Adapter 1 (currently NAT) goes into Bridged mode or if you still want Internet connection in the VM, add another one – Adapter 2 (Bridged) and leave adapter 1 as it is.
Size: ~ 3.83 GB
You will get 2 Virtualbox images
Supported moddels: E31, E34, E36, E38, E39, E46, E52, E53, E60, E65, E70, E83, E85, E87, E90, F01, F02, F07, F010, F011, F025, F30
Here is the guide on “how to”, for more information please refer to https://www.virtualbox.org/
Installation method:
Download Virtualbox and its extention pack and install it.
Open Virtualbox, go to “Machine” and press “Add”
Navigate to the software location and highlight the Blue color file (you can ignore the name) and press “open”
Go to Virtualbox, highlight the image and press “Start”
Installation method 2:
Download the [BMW] [BMW] INPA WinKFP NCSExpert .ova or .vmdk file (virtual machine) In VirtualBox – File=>Import Virtual appliance Choose the downloaded OVA or VMDK file and on the next step tick “Reinitialize the MAC address of all network cards” Start the Virtual Machine Next step – plug the K+Dcan cable, start the virtual machine and transfer it to it – from the menu – Devices>USB choose your cable (usually something that has 600 in the name, but probably you’ll know which one is it…) In the VM – right click on My Computer=>Manage=>Device Manager and check whether the cable is correctly isntalled – Ports (COM & LPT) – USB Serial port must be on COM1. If else – follow the readme instructions and use the drivers from the OriginalCable folder. This VM is for VirtualBox. It is not convertable to VMWare and it would not work. If you are getting blue screen of death – the problem is with your installation not with the image. Try it on something else and follow the provided instructions strictly!
  1. Ncs Expert Windows 7 Download Full
  2. Ncs Expert Windows 7 Download 64-bit
  3. Ncs Expert Windows 7 Download Torrent
  4. Ncs Expert Tool Windows 7 64 Bit Download
  5. Ncs Expert Windows 7 Download Free

BMW INPA Software is BMW diagnostics software that connects to all the systems and modules on BMW cars, not just engine like generic scanners, it reads BMW trouble codes and gives live diagnostics and data and GUI pages and test functions. BMW INPA software works with INPA K+DCAN Interface. VXDAS.COM has INPA K+DCAN cable with and without switch for BMW. Here provide INPA windows 7 download link here.

INPA Windows 7 Download
Software version: 5.0.2 (tested ok)

VXDAS team also glad to share the installation guide for INPA software with Win7 32bit. Check details below:

2020 bmw diagnostic software ediabas inpa ncs expert gt1 dis v57 v44 e-sys dr.gini rheingold ista-d ista-p autodata etk BMW Diagnostic Software SET - Ediabas INPA NCS Expert ALL VERSIONS Windows 32bit and 64bit. Got all files from here, NCS Expert version 4.0.1, Daten file copied into proper folder. When I first start and try to load profile, I get the following, no plain 'expertmode'. Poked around loading the 'OFFEN' profile, but didn't far, never got to showing VIN, and at one point said 'Chassis is. The default profile that comes with NCS Expert, 'Expertenmodus' (FZG2.PFL), does not support trace manipulation. If you do not already have a working profile, download NCS Dummy profile for NCS Expert 4 and extract NCSDUMMY4.PFL from the zip archive to the NCS Expert profiles folder C: NCSEXPER PFL. Creation date: Good Job Mate!!

We suggest to start with a fresh Windows 7 32 bit to get the BMW INPA software done, because this can help to collect necessary configuration files of INPA 5.0.2.

Here lists the link of free inpa software download and the relevant news. NCS Expert 4.0.1. BMW INPA Download & Installed on Windows XP/7/8/10 by CD Software.

To avoid further problems, it’s better to disable Windows auto update during the INPA Windows 7 installation process.

After entering your product key, screen will pop up security message.

Select ‘Ask me later’, this will prevent Windows 7 from automatically installing any updates.

Note:

If your installing from pre-SP1 Windows 7 media, we’d rather highly recommend that you manually install two Microsoft updates:

First one: System Update Readiness Tool (KB947821):
https://www.microsoft.com/en-us/download/details.aspx?id=3132

Second one: Windows 7 Service Pack 1 (KB976932):
https://www.microsoft.com/en-us/download/details.aspx?id=5842

During testing pre-SP1 Windows 7 no longer displayed a mouse pointer, after successfully installing EDIABAS & WinKFP and rebooting the system.

Follow steps 2 through 6 of the installation guide. During the EDIABAS & WinKFP install (step 3), select Windows XP (this is not mentioned in the installation guide.)

For all other selections, accept the default and click Weiter which is German for ‘further’. Keyscape piano vst free download.

The first time you attempt to install EDIABAS & WinKFP (step 3), regsvr32 maybe fail to register two Windows ActiveX controls.

Certainly, this is normal, upon re-installation everything will work properly.

Click on OK and then click on the large red circle with a white X at the bottom of the screen to see the second regsvr32 error.

Then click on OK to acknowledge the second error.

Press any key to exit the EDIABAS OBD setup program. Don’t be concerned about any registry key warnings, this installation of EDIABAS will never be used.

When prompted to reboot, select Nein for ‘No’ and then click on Beenden or ‘End’ to exit the installation program. Go to Control Panel and uninstall the program.

Once you have uninstalled the program, reinstall it. On the second attempt, the ActiveX controls will register properly.

This time, select Ja for ‘Yes’ and reboot.

Even with SP1 installed, on occasion the system will no longer display a mouse pointer after rebooting the system at this point.

If this happens, depress the Windows logo key (on some keyboards it may have an icon of a house instead) to display the Start menu.

Depress the right arrow key once and then depress Enter to initiate a proper shutdown. When powered back on, the system should have a functional mouse pointer.

Continue with steps 4-6 in the installation guide.

At the completion of step 5, the Windows Program Compatibility Assistant may appear. So click on ‘This program installed correctly.’

At this point you could optionally install the latest EDIABAS/INPA update (ES-76) from FAL’s EA-90X distribution.

We don’t recommend doing so as the latest INPA scripts are in German and not necessary for coding.

Now you have the base INPA scripts and configuration files that you’ll need to get the latest version of INPA (5.0.6) up and running.

Then copy the the INPA CFGDAT and SGDAT folders to removable media for safe keeping. They are located in C:EC-APPSINPA.

If you were to install the K+DCAN drivers from Windows Update, set the cable to COM1, etc.

Now the battery and ignition clamps maybe working properly.

INPA 5.0.2 is are not totally compatible with the latest SP Daten files (i.e. 50.2). So let’s move on to installing BMW Standard Tools 2.12.

Links to BMW Standard Tools 2.12 and NCS Expert profiles can be found in this post:
https://www.e90post.com/forums/showpost.php?p=13792990&postcount=4476

SP Daten 50.2 can be found in this thread:
https://www.e90post.com/forums/showthread.php?t=882353

Blow away your previous installation of Windows and start over with a fresh install. INPA 5.0.2 made changes to the Windows registry etc.

Ncs Expert Windows 7 Download Full

Now that we have the two folders needed to bootstrap INPA 5.0.6, it’s best to reinstall Windows.

If your installing from pre-SP1 Windows 7 media, don’t forget to install the System Update Readiness Tool (KB947821). And also Windows 7 Service Pack 1 (KB976932.)

In addition, because this will hopefully be your final re-installation of Windows, we suggest that you manually install one additional Microsoft update:

Microsoft .NET Framework 4.5.1:
https://www.microsoft.com/en-us/download/details.aspx?id=40779

When the K+DCAN cable is initially plugged in, Windows will indicate that the device driver was not successfully installed.

Click on the white box circled above when it appears to change the driver update settings.

Click on ‘Change setting’

Select ‘Always install the best driver software from Windows Update’ then click on Save Changes’

Windows Update will install the latest FTDI drivers needed for the one stop electronics.com K+DCAN cable.

Please notice that the FTDI driver has defaulted to USB Serial Port COM3.

You also need to change this to COM1 and then click on ‘Close’

Click on the Windows Start button to display the Start menu.

In the Start Search box type the following command and depress Enter to launch Device Manager:

Diagnostic software peugeot download. Code:

mmc devmgmt.msc

When Device Manager opens, click on the arrow to the left of ‘Ports (COM & LPT)’ to expand the Ports device tree. After that, double-click on ‘USB Serial Port (COM3)’ to open the device properties.

Click on the ‘Port Settings’ tab and then click on the ‘Advanced’ button to display the Advanced Settings for COM3.

Ncs Expert Windows 7 Download 64-bit

Then change the COM Port Number to COM1 and the Latency Timer to 1 msec and click ‘OK’

The USB Serial Port should be set to COM1. Close Device Manager.

Install BMW Standard Tools 2.12.

Accept the defaults and then click ‘Next’

When prompted to select additional tasks, de-select the ‘Execute backup and restore wizard’ selections under Data backup.

You don’t have an existing installation of BMW Standard Tools to backup. Click ‘Next’

Click ‘OK’ to acknowledge that the backup wizard has been deactivated.

When the Hardware Interface Settings screen appears, select ‘USB to serial adapter’ then click ‘Next’

Then click ‘Finish’ to complete the BMW Standard Tools setup and restart your computer.

When the User Account Control dialog box appears, select Yes to allow the Windows Command Processor to make changes to your computer.

Copy the Windows ActiveX control MSFLXGRD.OCX to C:WINDOWSSYSTEM32 and manually register it.

Then copy the Windows ActiveX control RICHTX32.OCX to C:WINDOWSSYSTEM32 and manually register it.

Overwrite the INPA initialization file in the C:EC-APPSINPACFGDAT folder with the INPA.INI from your saved CFGDAT folder.

Code:
C:>copy X:CFGDATINPA.INI C:EC-APPSINPACFGDAT /v /y1 file(s) copied.

Copy the INPA scripts and configuration files from your saved CFGDAT and SGDAT folders.

Code:
C:>copy X:CFGDAT*.ENG C:EC-APPSINPACFGDAT /v14 file(s) copied.

Then C:>copy X:SGDAT*.IPO C:EC-APPSINPASGDAT /v468 file(s) copied.

C:>copy X:SGDAT*.SRC C:EC-APPSINPASGDAT /v11 file(s) copied.

C:>copy X:SGDAT*.TXT C:EC-APPSINPASGDAT /v2 file(s) copied.

Now copy the group files from the SP Daten E89 folder to C:EDIABASECU.

Code:
C:>copy X:E89ECU*.GRP C:EDIABASECU /v80 file(s) copied.

Then import your daten files into WinKFP using this guide (steps 2-8)

Create a C:NCSEXPERDATENE89 folder and then copy the contents of the E89DATEN folder into it.

Code:
C:>mkdir C:NCSEXPERDATENE89C:>

copy X:E89DATEN*.* C:NCSEXPERDATENE89 /v430 file(s) copied.

Then copy the contents of the E89SGDAT folder to C:NCSEXPERSGDAT.
Code:
C:>copy X:E89SGDAT*.* C:NCSEXPERSGDAT /v224 file(s) copied.

Go to the E89DATEN directory and execute the LADEN.BAT script.
Code:
C:>cd X:E89DATENX:E89DATEN>laden.bat

You’ll receive errors at the end of the script due to the missing C:EC-APPSCARSERVER directory, ignore them.

Install the patched 32-bit NCS Expert from this thread:
http://www.e90post.com/forums/showthread.php?t=832476

Example:

Ncs Expert Windows 7 Download Torrent

Code:
Rename C:NCSEXPERBINNCSEXPER.EXE NCSEXPER.OLD

Then rename C:NCSEXPERCFGDATNCSEXPER.TXT NCSEXPER.GER

copy NCSEXPER.EXE C:NCSEXPERBIN /v

copy NCSEXPER.TXT C:NCSEXPERCFGDAT /v

Then copy the NCS Expert profiles to the C:NCSEXPERPFL folder.

Example:

Code:
copy *.PFL C:NCSEXPERPFL /v

Ok, finished and congratulations!

VXDAS team kindly note:

It’s better to install the BMW INPA software in Windows XP, it will be more stable when use.

Ncs Expert Tool Windows 7 64 Bit Download

Here is the installation guide of Win XP for INPA software:

Professional Diagnostic Solution & Service Supplier

Ncs Expert Windows 7 Download Free

Website：www.vxdas.com

Follow Us To Get More Free Resource